Mounting Bracket

Unifi Ap Nanohd Setup
Unifi Ap Nanohd Wave 2 Ac
Unifi Ap-nanohd Adoption Failed

The UniFi nanoHD Access Point features a low-profile form factor. The optional ceiling mount or custom skins allow the AP to blend even more discreetly into its setting. The UniFi nanoHD is a compact 4x4 MU-MIMO 802.11ac Wave 2 dual-band access point with an aggregate radio rate of over 2 Gbps and supports over 200 concurrent users. Engineered to take advantage of 802.11ac Wave 2, the UniFi nanoHDprovides powerful multi-user support in an elegant, nano-sized design. Running concurrent iperf3 to different wired servers through the same NanoHD AP I was getting 400Mbs on the MBP and 200Mbs on latest iphone. I did rough testing on 2.4gHz getting 80Mbs throughout the space with no dead zones luckily. Unifi 6 Lite vs NanoHD. Posted by 23 days ago. Unifi 6 Lite vs NanoHD. And 2 nanoHD AP’s. Standing just feet away from the nanoHD, I get 250-300 Mbps WiFi throughput (testing with an iPhone 12 Pro Max connected via the 5 GHz network). If I disconnect the nanoHD and plug in a 3-year-old NetGear R7000P router/AP (via the. UniFi nanoHD Access Point The UniFi nanoHD is a compact 4x4 MU-MIMO 802.11ac Wave 2 dual-band access point with an aggregate radio rate of over 2 Gbps and supports over 200 concurrent users. Engineered to take advantage of 802.11ac Wave 2, the UniFi nanoHDprovides powerful multi-user support in an elegant, nano-sized design.

Screws (Qty. 4)

Keps Nuts (Qty. 4)

Gigabit PoE* (48V, 0.3A) with Mount Bracket

* Included only in the single-pack of the UAP-nanoHD.

Unifi Ap Nanohd Setup

CAT5 cable
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)

IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher, available at: ui.com/download/unifi

System Requirements

Microsoft Windows 7/8/10, Mac OS X, or Linux
Java Runtime Environment 1.8 (or above)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi)

LED

Ports

Locking Notch
The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.)
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.
Ethernet
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.
Cable Feed Plug
If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.

Mounting Bracket

Locking Tab

During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft.

Initial Position

Final Position

Note: If you need to remove the UniFi AP from the Mounting Bracket, insert a paper clip in the Slot to release the Locking Tab and turn the UniFi AP counterclockwise.

The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.

Wall Mount

Unifi Ap Nanohd Wave 2 Ac

Optional

Ceiling Mount

The UAP-nanoHD features auto-sensing 802.3af PoE support and can be powered by any of the following:

Ubiquiti UniFi Switch with PoE
802.3af PoE compliant switch
Ubiquiti Gigabit PoE Adapter (48V, 0.3A)

The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately.

Connecting to a PoE Switch

Unifi Ap-nanohd Adoption Failed

Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port on the switch.

UAP-nanoHD
Dimensions	160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29')
Weight With Mounting Kits	300 g (10.6 oz) 315 g (11.1 oz)
Networking Interface	(1) RJ45 GbE
Buttons	(1) Reset to Defaults
Power Method	802.3af
Power Supply	48V, 0.3A Gigabit PoE Adapter*
Max. Power Consumption	10.5W
Operating Frequency	2.4 GHz 5 GHz
Max. TX Power 2.4 GHz 5 GHz	23 dBm 26 dBm
Antenna Gain 2.4 GHz 5 GHz	2.8 dBi 3 dBi
MIMO 2.4 GHz 5 GHz	2x2 4x4
Radio Rate 2.4 GHz 5 GHz	300 Mbps 1733 Mbps
Wi-Fi Standards	802.11 a/b/g/n/ac/ac-wave2
Wireless Security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID	8 per Radio
Mounting	Wall/Ceiling (Kits Included)
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC

* Only the single-pack of the UAP-nanoHD includes a PoE adapter.

Operating Frequency (MHz)
US/CA	2400 - 2483.5
	U-NII-1	5150 - 5250
	U-NII-2A	5250 - 5350
	U-NII-2C	5470 - 5725
	U-NII-3	5725 - 5850
Worldwide	2400 - 2483.5 5150 - 5875